D-Link xStack Reference Manual page 287

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#debug vrrp state enable
Command: debug vrrp state enable
Success.
DGS-3120-24TC:admin#
22-49 debug pim ssm (RI Mode Only)
Description
This command is used to enable the PIM-SSM debug function.
Format
debug pim ssm
Parameters
None.
Restrictions
Only Administrator level can issue this command.
Example
To enable the PIM-SSM debug function:
DGS-3120-24TC:admin#debug pim ssm
Command: debug pim ssm
Success.
DGS-3120-24TC:admin#
Once the PIM-SSM debug enabled, the debug information maybe outputted.
DGS-3120-24TC:admin#PIM_SSM, 29 Oct 2012 11:04:12 IGMP v1/v2 Report for group
232.1.1.0 from 192.168.121.1 on n121, ignored.
Output truncated...
22-50 no debug pim ssm (RI Mode Only)
Description
This command is used to disable the PIM-SSM debug function.
Format
no debug pim ssm
282