D-Link xStack Reference Manual page 320

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
a request from the client, the server will automatically find a pool to allocate the address. If the
request is relayed to the server by the intermediate device, the server will match the gateway IP
address carried in the packet against the network of each DHCP pool. The pool which has the
longest match will be selected. If the request packet is not through relay, then the server will match
the IP address of the IPIF that received the request packet against the network of each DHCP pool.
Format
config dhcp pool network_addr <pool_name 12> <network_address>
Parameters
<pool_name 12> - Specify the DHCP pool name.
<network_address> - Specify the IP address that the DHCP server may assign to clients.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the address range of the DHCP address pool:
DGS-3120-24TC:admin#config dhcp pool network_addr dhcppool01 10.10.10.0/24
Command: config dhcp pool network_addr dhcppool01 10.10.10.0/24
Success.
DGS-3120-24TC:admin#
26-7 config dhcp pool domain_name
Description
This command is used to specify the domain name for the client if the server allocates the address
for the client from this pool. The domain name configured here will be used as the default domain
name by the client. By default, the domain name is empty. If the domain name is empty, the
domain name information will not be provided to the client.
Format
config dhcp pool domain_name <pool_name 12> {<domain_name 64>}
Parameters
<pool_name 12> - Specify the DHCP pool name.
<domain_name 64> - (Optional) Specify the domain name of the client.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
315