D-Link xStack Reference Manual page 448

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
<portlist> - Enter the list of port used here.
all - Specify that all the ports will be used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure an IMPB entry:
DGS-3120-24TC:admin# config address_binding ip_mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-
00-00-11
Success.
DGS-3120-24TC:admin#
42-8 show address_binding
Description
This command is used to display the IMPB global settings or IMPB settings on specified ports.
Format
show address_binding {ports {<portlist>}}
Parameters
ports - (Optional) Specify the ports for which the information is displayed. If not specified, all
ports are displayed.
<portlist> - (Optional) Enter the list of ports used here.
Restrictions
None.
Example
To show the IMPB global configuration:
443