D-Link xStack Reference Manual page 581

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
56-15 show mac_based_access_control
Description
This command is used to display the MAC-based Access Control setting.
Format
show mac_based_access_control {ports {<portlist>}}
Parameters
ports – (Optional) Displays the MAC-based Access Control settings for a specific port or range of
ports.
<portlist> - (Optional) Enter the list of port used for this configuration here.
If no parameter is specified, the global MAC-based Access Control settings will be displayed.
Restrictions
None.
Example
To show the MAC-based Access Control port configuration for ports 1 to 4:
DGS-3120-24TC:admin#show mac_based_access_control ports 1:1-1:4
Command: show mac_based_access_control ports 1:1-1:4
Port State
----- --------
1:1 Disabled
1:2 Disabled
1:3 Disabled
1:4 Disabled
DGS-3120-24TC:admin#
56-16 show mac_based_access_control_local
Description
This command is used to display the MAC-based Access Control local database entry(s).
Format
show mac_based_access_control_local {[mac <macaddr> | vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
Parameters
mac - (Optional) Displays MAC-based Access Control local database entries for a specific MAC
Aging Time Block Time
(min) (sec)
---------- ---------
1440 300
1440 300
1440 300
1440 300
576
Auth Mode Max User
---------- --------
Host-based 128
Host-based 128
Host-based 128
Host-based 128