Chapter 49 Jumbo Frame Command List - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Chapter 49 Jumbo Frame Command
enable jumbo_frame
disable jumbo_frame
show jumbo_frame
49-1 enable jumbo_frame
Description
This command is used to configure the jumbo frame setting as enable.
Format
enable jumbo_frame
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the Jumbo frame:
DGS-3120-24TC:admin# enable jumbo_frame
Command: enable jumbo_frame
The maximum size of jumbo frame is 13312 bytes.
Success.
DGS-3120-24TC:admin#
49-2 disable jumbo_frame
Description
This command is used to configure the jumbo frame setting as disable.
Format
disable jumbo_frame
List
511