D-Link xStack Reference Manual page 847

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
delete route redistribute dst ospf src [local | static | rip]
Parameters
local - Specify the source protocol as local.
static - Specify the source protocol as static.
rip - Specify the source protocol as RIP.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete route redistribution settings:
DGS-3120-24TC:admin#delete route redistribute dst ospf src local
Command: delete route redistribute dst ospf src local
Success.
DGS-3120-24TC:admin#
87-8 create route redistribute dst rip src (RI Mode Only)
Description
This command is used to redistribute routing information from other routing protocols into RIP.
When the metric is specified as 0, the metric in the original route will become the metric of the
redistributing RIP routes transparently. If the metric of the original routes is greater than 16, the
route will be not redistributed.
Format
create route redistribute dst rip src [local | static | ospf [all | internal | external | type_1 |
type_2 | inter+e1 | inter+e2]] {metric <value 0-16> | route_map <map_name 16>}
Parameters
local - Redistribute local routes into RIP.
static - Redistribute static routes into RIP.
ospf - Redistribute OSPF routes into RIP.
all - Redistribute both OSPF AS-internal and OSPF AS-external routes into RIP.
internal - Only redistribute OSPF AS-internal routes.
external - Only redistribute OSPF AS-external routes, including type-1 and type-2 routes.
type_1 - Only redistribute OSPF AS-internal type-1 routes.
type_2 - Only redistribute OSPF AS-internal type-2 routes.
inter+e1 - Only redistribute OSPF AS-internal type-1 and OSPF AS-internal routes.
inter+e2 - Only redistribute OSPF AS-internal type-2 and OSPF AS-internal routes.
metric - (Optional) Specifies the RIP route metric value for the redistributed routes.
<value 0-16> - Enter the value from 0 to 16. The default value is 0.
842