Disable Ssl - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#
Command: enable ssl
Note: Web will be disabled if SSL is enabled.
Success.
DGS-3120-24TC:admin#
92-3

disable ssl

Description
This command is used to disable SSL feature and supported ciphercuites. Using "disable ssl"
command will disable SSL feature and for each ciphersuites status user must specified it by this
command.
Format
disable ssl {ciphersuite {RSA_with_RC4_128_MD5 | RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA | RSA_EXPORT_with_RC4_40_MD5}}
Parameters
ciphersuite - (Optional) Specify the cipher suite combination used for this configuration.
RSA_with_RC4_128_MD5 - Indicate RSA key exchange with RC4 128 bits encryption and
MD5 hash.
RSA_with_3DES_EDE_CBC_SHA - Indicate RSA key exchange with 3DES_EDE_CBC
encryption and SHA hash.
DHE_DSS_with_3DES_EDE_CBC_SHA - Indicate DH key exchange with 3DES_EDE_CBC
encryption and SHA hash.
RSA_EXPORT_with_RC4_40_MD5 - Indicate RSA_EXPORT key exchange with RC4 40 bits
encryption and MD5 hash.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable SSL ciphersuite for RSA_with_RC4_128_MD5:
DGS-3120-24TC:admin#
Command: disable ssl ciphersuite RSA_with_RC4_128_MD5
Success.
DGS-3120-24TC:admin#
To disable SSL:
enable ssl
disable ssl ciphersuite RSA_with_RC4_128_MD5
876