D-Link xStack Reference Manual page 464

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#config address_binding dhcp snooping ports 1:1 limit rate
10
mode drop
Command: config address_binding dhcp snooping ports 1:1 limit rate 10 mode drop
Success.
DGS-3120-24TC:admin#
42-28 config address_binding dhcp snooping recovery_timer
Description
This command is used to configure the auto recovery timer value.
Format
config address_binding dhcp snooping recovery_timer [<sec 60-1000000> | infinite]
Parameters
<sec 60-1000000> - Enter a value between 60 and 1000000 for the time interval used by the
auto-recovery mechanism.
infinite - Specify that the port cannot be auto-recovered.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the auto-recovery time as 1000 seconds:
DGS-3120-24TC:admin#config address_binding dhcp snooping recovery_timer 1000
Command: config address_binding dhcp snooping recovery_timer 1000
Success.
DGS-3120-24TC:admin#
459