Show Loopdetect; Show Loopdetect Ports - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin# disable loopdetect
Command: disable loopdetect
Success.
DGS-3120-24TC:admin#
53-5

show loopdetect

Description
This command is used to display the LBD global configuration.
Format
show loopdetect
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To show the LBD global settings:
DGS-3120-24TC:admin#show loopdetect
Command: show loopdetect
LBD Global Settings
---------------------------
Status
Mode
Interval
Recover Time
Trap State
Log State
Function Version : v4.04
DGS-3120-24TC:admin#
53-6

show loopdetect ports

Description
This command is used to display the LBD per-port configuration.
: Disabled
: Port-based
: 10 sec
: 60 sec
: None
: Enabled
553