D-Link xStack Reference Manual page 682

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Parameters
<area_id> - A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the OSPF area in the OSPF domain.
<network_address> - The IP address that uniquely identifies the network that corresponds to
the OSPF Area. The network address format is 'IP address/prefix length'.
lsdb_type - Specify the LSDB type.
summary - Specify the summary type.
nssa_ext - Specify the NSSA EXT type.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an OSPF area aggregation entry:
DGS-3120-24TC:admin#delete ospf aggregation 10.48.74.122 192.168.0.1/16
lsdb_type summary
Command: delete ospf aggregation 10.48.74.122 192.168.0.1/16 lsdb_type summary
Success.
DGS-3120-24TC:admin#
69-5 show ospf aggregation
Description
This command is used to display the current OSPF area aggregation settings.
Format
show ospf aggregation {<area_id>}
Parameters
<area_id> - (Optional) Enter the area ID used here.
Restrictions
None.
Example
To display OSPF area aggregation settings:
677