D-Link xStack Reference Manual page 257

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#debug show status
Command: debug show status
Debug Global State
MSTP
IMPB
DHCPv6_CLIENT
DHCPv6_RELAY
ERPS
DGS-3120-24TC:admin#
22-11 debug dhcpv6_client state enable
Description
This command is used to enable the DHCPv6 client debug function.
Format
debug dhcpv6_client state enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enabled the DHCPv6 client debug function:
DGS-3120-24TC:admin#debug dhcpv6_client state enable
Command: debug dhcpv6_client state enable
Success.
DGS-3120-24TC:admin#
22-12 debug dhcpv6_client state disable
Description
This command is used to disable the DHCPv6 client debug function.
Format
debug dhcpv6_client state disable
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
252