®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
show qinq inner_tpid
Parameters
None.
Restrictions
None.
Example
To display the inner-TPID of a system:
DGS-3120-24TC:admin# show qinq inner_tpid
Command: show qinq inner_tpid
Inner TPID: 0x9100
DGS-3120-24TC:admin#
82-7
show qinq ports
Description
This command is used to display the QinQ configuration of the ports.
Format
show qinq ports {<portlist>}
Parameters
ports - Specify a list of ports to be displayed.
<portlist> - (Optional) Enter the list of ports to be displayed here.
Restrictions
None.
Example
To show the QinQ mode for ports 1-2 of unit 1:
798