D-Link xStack Reference Manual page 447

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
delete address_binding ip_mac [all | ipaddress <ipaddr> mac_address <macaddr> |
ipv6address <ipv6addr> mac_address <macaddr>]
Parameters
all - Specify that all the MAC address will be used.
ipaddress - Specify the learned IP address of the entry in the database.
<ipaddr> - Enter the IP address used.
mac_address - Specify the MAC address used for this configuration.
<macaddr> - Enter the MAC address used.
Ipv6address - Specify the learned IPv6 address of the entry in the database.
<ipv6addr> - Enter the IPv6 address used.
mac_address - Specify the MAC address used for this configuration.
<macaddr> - Enter the MAC address used.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a blocked address:
DGS-3120-24TC:admin#delete address_binding ip_mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-11
Command: delete address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-
00-00-11
Success.
DGS-3120-24TC:admin#
42-7 config address_binding ip_mac
Description
This command is used to update an IMPB entry.
Format
config address_binding ip_mac ipaddress <ipaddr> mac_address <macaddr> {ports
[<portlist> | all]}
Parameters
ipaddress - Specify the IP address of the entry being updated.
<ipaddr> - Enter the IP address used here.
mac_address - Specify the MAC address of the entry being updated
<macaddr> - Enter the MAC address used here.
ports - (Optional) Specify which ports are used for the IMPB entry being updated. If not specified,
then it is applied to all ports.
442