Enable Ospf - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#show ospf virtual_link
Command: show ospf virtual_link
Virtual Interface Configuration
Transit Virtual
Area ID Neighbor Router Interval Interval
--------------- --------------- -------- -------- -------------- ------
10.1.1.1 20.1.1.1
Total Entries : 1
DGS-3120-24TC:admin#

69-19 enable ospf

Description
This command is used to enable OSPF on the Switch.
Format
enable ospf
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable OSPF on the Switch:
DGS-3120-24TC:admin#enable ospf
Command: enable ospf
Success.
DGS-3120-24TC:admin#
69-20 disable ospf
Description
This command is used to disable OSPF on the Switch.
Hello Dead Authentication Link
30 60 None
688
Status
Down