D-Link xStack Reference Manual page 528

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
51-7 show lacp_port
Description
This command is used to display the current mode of LACP of the ports.
Format
show lacp_port <portlist>
Parameters
lacp_port - Specified a range of ports to be configured. (UnitID:port number).
<portlist> - Enter the list of ports used for this configuration here.
If no parameter specified, the system will display current LACP and all port status.
Restrictions
None.
Example
To show port lacp mode:
DGS-3120-24TC:admin# show lacp_port
Command: show lacp_port
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
11 Active
12 Active
DGS-3120-24TC:admin#
523