Show Igmp Group - D-Link xstack DGS-3620 series Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display the IGMP configuration for all interfaces:
DGS-3620-28PC:admin#show igmp
Command: show igmp
IGMP Interface Configurations
Interface IP Address/Netmask
------------ ------------------
System 10.90.90.90/8
Total Entries: 1
DGS-3620-28PC:admin#
43-3

show igmp group

Description
This command is used to display the switch's IGMP group table.
Format
show igmp group {group <group> | ipif <ipif_name 12>}
Parameters
group - (Optional) Specifies the multicast group ID.
<group> - Enter the multicast group ID value here.
ipif - (Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12> - Enter the IP interface name used for this configuration here. This name can
be up to 12 characters long.
all - Specifies that all the IP interfaces will be used.
If no parameter is specified, the system will display all IGMP group tables.
Restrictions
None.
Example
To display the IGMP group table:
DGS-3620-28PC:admin# show igmp group
Command: show igmp group
Interface Multicast Group
------------ ---------------
System 224.0.1.24
Ver- Query Maximum
sion Response ness
Time
---- ------ -------- ------- -------- --------
3 125 10
Last Reporter IP Querier
--------------- -------------------
10.18.1.3 10.48.74.122
533
Robust- Last State
Member
Value Query
Interval
2 1 Disabled
IP Expire
---------
259