D-Link xStack Reference Manual page 909

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Example
Configure the interval of sFlow counter poller port 1 to be 0:
DGS-3120-24TC:admin#config sflow counter_poller ports 1:1 interval disable
Command: config sflow counter_poller ports 1:1 interval disable
Success.
DGS-3120-24TC:admin#
95-6 delete sflow counter_poller
Description
This command is used to delete the sFlow counter poller from the specified port.
Format
delete sflow counter_poller ports [<portlist> | all]
Parameters
ports - Specify the list of ports to delete the counter poller.
<portlist> - Enter the list of ports that will be used for this configuration here.
all - Specify all ports on the Switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Delete sFlow counter poller on port 1:
DGS-3120-24TC:admin#delete sflow counter_poller ports 1:1
Command: delete sflow counter_poller ports 1:1
Success.
DGS-3120-24TC:admin#
95-7 create sflow analyzer_server
Description
This command is used to create the analyzer server. You can specify more than one
analyzer_server with the same IP address but with different UDP port numbers. You can have up
to four unique combinations of IP address and UDP port number.
904