D-Link xStack Reference Manual page 694

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
disable ospf
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable OSPF on the Switch:
DGS-3120-24TC:admin#disable ospf
Command: disable ospf
Success.
DGS-3120-24TC:admin#
69-21 show ospf
Description
This command is used to display the current OSPF information on the Switch.
Format
show ospf {[ipif <ipif_name 12> | all]}
Parameters
ipif - (Optional) Specify the IP interface name.
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
all - Specify that all the IP interfaces will be displayed.
If no parameter is specified, the system will display the current OSPF state.
Restrictions
None.
Example
To display the current OSPF state:
689