D-Link xStack Reference Manual page 299

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
interface level, then the configuration at the interface level has higher priority. In this case, the
DHCP server configured on the VLAN will not be used to forward the DHCP packets.
Format
config dhcp_relay add vlanid <vlan_id_list> <ipaddr>
Parameters
vlanid - Specify the VLAN ID list used for this configuration.
<vlan_id_list> - Enter the VLAN ID list used for this configuration here.
<ipaddr> - Enter the DHCP/BOOTP server IP address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a DHCP/BOOTP server 10.43.21.12 to VLAN 1 to 10:
DGS-3120-24TC:admin# config dhcp_relay add vlanid 1-10 10.43.21.12
Command: config dhcp_relay add vlanid 1-10 10.43.21.12
Success.
DGS-3120-24TC:admin#
To display the DHCP relay status:
294