Show Snmp View; Enable Snmp - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide

98-13 show snmp view

Description
This command is used to display the SNMP view record.
Format
show snmp view {<view_name 32>}
Parameters
view - (Optional) View name of the user who likes to show.
<view_name 32> - Enter the view name here. The name can be up to 32 characters long.
Restrictions
None.
Example
To show SNMP view:
DGS-3120-24TC:admin# show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
---------------------
view123
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 9
DGS-3120-24TC:admin#

98-14 enable snmp

Description
This command is used to enable the SNMP function.
Format
enable snmp
Subtree
------------------------
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
931
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Excluded
Included