D-Link xStack Reference Manual page 850

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
None.
Example
To display the route redistribution settings:
DGS-3120-24TC:admin#show route redistribute
Command: show route redistribute
Route Redistribution Settings
Source Destination
Protocol Protocol
-------- ------------
OSPF RIP
RIP OSPF
Total Entries : 2
DGS-3120-24TC:admin#
87-12 show route redistribute dst ospf (RI Mode Only)
Description
This command is used to display the redistribution with the target protocol OSPF.
Format
show route redistribute dst ospf {src [local | static | rip]}
Parameters
src - (Optional) Specify the source protocol.
local - Display the redistribution with the source local.
static - Display the redistribution with the source static.
rip - Display the redistribution with the source protocol RIP.
Restrictions
None.
Example
To display the redistribution with the target protocol OSPF:
Type Metric
-------- ------------ ------------
Internal 2
Type-1 2
845
RouteMapName
N/A
N/A