D-Link xStack Reference Manual page 307

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
25-13 show dhcp_relay option_60
Description
This command is used to show DHCP relay option 60 entry by the user specified.
Format
show dhcp_relay option_60 {[string <multiword 255> | ipaddress <ipaddr> | default]}
Parameters
string - (Optional) Show the entry which's string equal the string of specified.
<multiword 255> - Enter the entry's string value here. This value can be up to 255 characters
long.
ipadddress - (Optional) Show the entry whose IP address equal the specified ipaddress.
<ipaddr> - Enter the IP address here.
default - (Optional) Show the defaut behaviour of DHCP relay option 60.
If no parameter is specified then all the DHCP option 60 entries will be displayed.
Restrictions
None.
Example
To show DHCP option 60 information:
DGS-3120-24TC:admin#show dhcp_relay option_60
Command: show dhcp_relay option_60
Default Processing Mode: Drop
Default Servers:
Matching Rules:
String
-------
abc
Total Entries : 1
DGS-3120-24TC:admin#
25-14 config dhcp_relay option_61
Description
This command is used to decide whether the DHCP relay will process the DHCP option 61 or not.
When option 61 is enabled, if the packet does not have option 61, then the relay servers cannot be
determined based on option 61.
Match Type
---------
Exact Match
302
IP Address
---------
10.90.90.1