D-Link xStack Reference Manual page 572

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
56-5 config mac_based_access_control method
Description
This command is used to configure the MAC-based Access Control authentication method.
Format
config mac_based_access_control method [local | radius]
Parameters
local - Specify to authenticate via the local database.
radius - Specify to authenticate via a RADIUS server.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the MAC-based Access Control authentication method as local:
DGS-3120-24TC:admin# config mac_based_access_control method local
Command: config mac_based_access_control method local
Success.
DGS-3120-24TC:admin#
56-6 config mac_based_access_control guest_vlan
Description
This command is used to assign a specified port list to the MAC-based Access Control guest
VLAN. Ports that are not contained in port list will be removed from the MAC-based Access
Control guest VLAN.
For detailed information on the operation of MAC-based Access Control guest VLANs, please see
the description for the "config mac_based_access_control ports" command.
Format
config mac_based_access_control guest_vlan ports <portlist>
Parameters
ports - Specify MAC-based Access Control guest VLAN membership.
<portlist> - Enter the list of port used for this configuration here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
567