D-Link xStack Reference Manual page 541

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Aggregation Port ID
Maximum Frame Size
DGS-3120-24TC:admin#
To display outbound LLDP advertisements for port 1 in normal mode:
DGS-3120-24TC:admin#show lldp local_ports 1:1 mode normal
Command: show lldp local_ports 1:1 mode normal
Port ID : 1:1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Port PVID
Management Address Count
PPVID Entries Count
VLAN Name Entries Count
Protocol Identity Entries Count
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
DGS-3120-24TC:admin#
To display outbound LLDP advertisements for port 1 in brief mode:
DGS-3120-24TC:admin#
Command: show lldp local_ports 1:1 mode brief
Port ID 1:
-----------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
DGS-3120-24TC:admin#
52-11 show lldp remote_ports
Description
This command is used to display the information learned from the neighbor parameters.
Format
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
show lldp local_ports 1:1 mode brief
: LOCAL
: 1/1
: RMON Port 1 on Unit 1
536
: 0
: 1536
: MAC Address
: 00-01-02-03-04-01
: D-Link DGS-3120-24TC R2.00.010
Port 1 on Unit 1
: 1
: 2
: 0
: 1
: 0
: (See Detail)
: (See Detail)
: 1536