D-Link xStack Reference Manual page 563

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Example
To delete the loopback interface named loopback1:
DGS-3120-24TC:admin#delete loopback ipif loopback1
Command: delete loopback ipif loopback1
Success.
DGS-3120-24TC:admin#
54-4 show loopback ipif
Description
This command is used to display the information of the loopback interface.
Format
show loopback ipif {<ipif_name 12>}
Parameters
<ipif_name 12> - (Optional) Enter the IP interface name used for this configuration here. This
name can be up to 12 characters long.
Restrictions
None.
Example
To show the information of the loopback interface named loopback1:
DGS-3120-24TC:admin#show loopback ipif loopback1
Command: show loopback ipif loopback1
Loopback Interface
Interface Admin State
IPv4 Address
Total Entries : 1
DGS-3120-24TC:admin#
: loopback1
: Enabled
: 20.0.0.2/8 (Manual)
558