D-Link xStack Reference Manual page 21

Dgs-3120 series layer 3 managed gigabit switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
config greeting_message {default}
Parameters
default - (Optional) Adding this parameter to the "config greeting_message" command will return
the greeting message (banner) to its original factory default entry.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To edit the banner:
DGS-3120-24TC:admin#config greeting_message
Command: config greeting_message
Greeting Messages Editor
================================================================================
Copyright(C) 2013 D-Link Corporation. All rights reserved.
================================================================================
<Function Key>
Ctrl+C
Quit without save
Ctrl+W
Save and quit
--------------------------------------------------------------------------------
2-13
show greeting_message
Description
The command is used to display greeting message.
Format
show greeting_message
DGS-3120-24TC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 3.00.522
<Control Key>
left/right/
up/down
Ctrl+D
Ctrl+X
Ctrl+L
16
Move cursor
Delete line
Erase all setting
Reload original setting

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3120-24tc

Table of Contents