D-Link xStack Reference Manual page 454

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
ports - Specify the ports used for this configuration.
<portlist> - Enter a list of ports used here.
If no parameters are specified, show DHCP snooping displays the enable/disable state.
Restrictions
None.
Example
To show the DHCP snooping state:
DGS-3120-24TC:admin#show address_binding dhcp_snoop
Command: show address_binding dhcp_snoop
DHCP Snoop(IPv4) : Enabled
DHCP Snoop(IPv6) : Disabled
Auto Recovery Time : 300 Seconds
DGS-3120-24TC:admin#
To display DHCP snooping maximun entry configuration:
DGS-3120-24TC:admin# show address_binding dhcp_snoop max_entry
Command: show address_binding dhcp_snoop max_entry
Port Max Entry
---- ---------
1:1 No Limit
1:2 No Limit
1:3 No Limit
1:4 No Limit
1:5 No Limit
1:6 No Limit
1:7 No Limit
1:8 No Limit
1:9 No Limit
1:10 No Limit
1:11 No Limit
1:12 No Limit
1:13 No Limit
1:14 No Limit
1:15 No Limit
1:16 No Limit
1:17 No Limit
1:18 No Limit
1:19 No Limit
1:20 No Limit
CTRL+C ESC q Quit SPACE n Next Page ENTER
449
Next Entry a All