Show Autoconfig - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
disable autoconfig
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable autoconfig:
DGS-3120-24TC:admin# disable autoconfig
Command: disable autoconfig
Success.
DGS-3120-24TC:admin#
11-3

show autoconfig

Description
This command is used to display if the auto-configuration is enabled or disabled.
Format
show autoconfig
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To show autoconfig status:
DGS-3120-24TC:admin# show autoconfig
Command: show autoconfig
Autoconfig State : Disabled
DGS-3120-24TC:admin#
152