D-Link xStack Reference Manual page 302

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DHCP relay function.
DGS-3120-24TC:admin# enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3120-24TC:admin#
25-7 disable dhcp_relay
Description
This command is used to disable the DHCP relay function on the Switch.
Format
disable dhcp_relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the DHCP relay function:
DGS-3120-24TC:admin# disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3120-24TC:admin#
25-8 show dhcp_relay
Description
This command is used to display the current DHCP relay configuration.
297