D-Link xStack Reference Manual page 71

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
5-5 enable authen_policy
Description
This command is used to enable system access authentication policy.
Enable system access authentication policy. When authentication is enabled, the device will adopt
the login authentication method list to authenticate the user for login, and adopt the enable
authentication method list to authenticate the enable password for promoting the user's privilege to
Admin level.
Format
enable authen_policy
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable system access authentication policy:
DGS-3120-24TC:admin# enable authen_policy
Command: enable authen_policy
Success.
DGS-3120-24TC:admin#
5-6 disable authen_policy
Description
This command is used to disable system access authentication policy.
Disable system access authentication policy. When authentication is disabled, the device will
adopt the local user account database to authenticate the user for login, and adopt the local
enable password to authenticate the enable password for promoting the user's privilege to Admin
level.
Format
disable authen_policy
Parameters
None.
66