D-Link xStack Reference Manual page 367

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an R-APS VLAN:
DGS-3120-24TC:admin# create erps raps_vlan 4094
Command: create erps raps_vlan 4094
Success.
DGS-3120-24TC:admin#
34-4 delete erps raps_vlan
Description
This command is used to delete an R-APS VLAN on a switch. When an R-APS VLAN is deleted,
all parameters related to this R-APS VLAN will also be deleted. This command can only be issued
when the ring is not active.
Format
delete erps raps_vlan <vlanid 1-4094>
Parameters
<vlanid 1-4094> - Specify the VLAN which will be the R-APS VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an R-APS VLAN:
DGS-3120-24TC:admin# delete erps raps_vlan 4094
Command: delete erps raps_vlan 4094
Success.
DGS-3120-24TC:admin#
34-5 config erps raps_vlan
Description
This command is used to configure the ERPS R-APS VLAN settings.
362