D-Link xStack Reference Manual page 22

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To display greeting message:
DGS-3120-24TC:admin#show greeting_ message
Command: show greeting_message
================================================================================
Copyright(C) 2013 D-Link Corporation. All rights reserved.
================================================================================
DGS-3120-24TC:admin#
2-14 config command_prompt
Description
This command is used to modify the command prompt.
The current command prompt consists of four parts: "product name" + ":" + "user level" + "#" (e.g.
"DGS-3120-24TC:admin#"). This command is used to modify the first part (1. "product name") with
a string consisting of a maximum of 16 characters, or to be replaced with the users' login user
name.
DGS-3120-24TC Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 3.00.522
17