D-Link xStack Reference Manual page 551

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
52-19 show lldp_med
Description
This command is used to display the Switch's general LLDP-MED configuration status.
Format
show lldp_med
Parameters
None.
Restrictions
None.
Example
To display the Switch's general LLDP-MED configuration status:
DGS-3120-24TC:admin#show lldp_med
Command: show lldp_med
LLDP-MED System Information:
Device Class
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
PoE Device Type
PoE PSE Power Source
LLDP-MED Configuration:
Fast Start Repeat Count
LLDP-MED Log State:Enabled
DGS-3120-24TC:admin#
52-20 show lldp_med local_ports
Description
This command is used to display the per-port LLDP-MED information currently available for
populating outbound LLDP-MED advertisements.
: Network Connectivity Device
: B1
: 3.00.501
: 3.00.522
: PVT93CB000001
: D-Link
: DGS-3120-24TC Gigabit Ethernet S
:
: PSE Device
: Primary
: 4
546