D-Link xStack Reference Manual page 266

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator level can issue this command.
Example
To stop IMPB debug: starting when the IMPB module receives an ARP/IP or DHCP packet:
DGS-3120-24TC:admin# no debug address_binding
Command: no debug address_binding
Success.
DGS-3120-24TC:admin#
22-26 debug show address_binding binding_state_table
Description
This command is used to display the ND snooping and DHCPv6 binding state table.
Format
debug show address_binding binding_state_table [nd_snooping | dhcpv6_snooping]
Parameters
nd_snooping – Display the ND Snooping binding state table.
dhcpv6_snooping – Display the DHCPv6 binding state table.
Restrictions
Only Administrator level can issue this command.
Example
To display the DHCPv6 snooping binding state of entries in BST:
DGS-3120-24TC:admin#debug show address_binding binding_state_table
dhcpv6_snooping
Command: debug show address_binding binding_state_table dhcpv6_snooping
S (State) - S: Start, L: Live, D :Detection, R: Renew, B: Bound
Time - Expiry Time (sec)
IP Address
--------------------------------------- ----------------- -- ---------- -----
2001:2222:1111:7777:5555:6666:7777:8888
2001::1
Total entries : 2
DGS-3120-24TC:admin#
MAC Address
00-00-00-00-00-02 S
00-00-00-00-03-02 B
261
S Time Port
50 5
100 6