D-Link xStack Reference Manual page 263

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator level can issue this command.
Example
To print out all debug IMPB messages:
DGS-3120-24TC:admin# debug address_binding all state enable
Command: debug address_binding all state enable
Success.
DGS-3120-24TC:admin#
22-21 debug ripng state enable (RI Mode Only)
Description
This command is used to enable the RIPng debug flag.
Format
debug ripng state enable
Parameters
None.
Restrictions
Only Administrator level can issue this command.
Example
To enable RIPng debug globally:
DGS-3120-24TC:admin#debug ripng state enable
Command: debug ripng state enable
Success.
DGS-3120-24TC:admin#
22-22 debug ripng state disable (RI Mode Only)
Description
This command is used to disable the RIPng debug flag.
Format
debug ripng state disable
258