D-Link xStack Reference Manual page 708

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Format
delete ospfv3 aggregation <area_id> <ipv6networkaddr>
Parameters
<area_id> - Enter the OSPFv3 area ID where the aggregation belongs to.
<ipv6networkaddr> - Enter the IPv6 network address of the aggregation.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an OSPFv3 area aggregation:
DGS-3120-24TC:admin#delete ospfv3 aggregation 2.2.2.2 2000::/16
Command: delete ospfv3 aggregation 2.2.2.2 2000::/16
Success.
DGS-3120-24TC:admin#
70-13 show ospfv3 aggregation
Description
This command is used to display OSPFv3 area aggregation configurations.
Format
show ospfv3 aggregation {<area_id>}
Parameters
<area_id> - (Optional) Enter the OSPFv3 area ID where the aggregation belongs to.
Restrictions
None.
Example
To display OSPFv3 area aggregations:
703