Debug Stp Show Flag - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Regional Root Bridge
Internal Root Cost
Designated Bridge
Designated Port
Message Age
Max Age
Forward Delay
Hello Time
--------------------------------------
Designated Priority And Times:
Instance 0:
--------------------------------------
Port Priority And Times:
Instance 0:
DGS-3120-24TC:admin#
63-3

debug stp show flag

Description
This command is used to display the STP debug level on specified ports.
Format
debug stp show flag {ports <portlist>}
Parameters
ports - (Optional) Specify the STP ports to display.
<portlist> - (Optional) Enter the list of port used for this configuration here.
If no parameter is specified, all ports on the Switch will be displayed.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the debug STP levels on all ports:
DGS-3120-24TC:admin#debug stp show flag
Command: debug stp show flag
Warning: only support local device.
Global State: Enabled
Port Index Event Flag
----------------------------------------------------------
1:1 Brief
1:2 Brief
: 32768/00-01-70-33-21-02
: 0
: 32768/00-01-70-33-21-02
: 0
: 0
: 20
: 15
: 2
BPDU Flag
Brief
Brief
622
State Machine Flag
Brief
Brief