D-Link xStack Reference Manual page 366

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin# enable erps
Command: enable erps
Success.
DGS-3120-24TC:admin#
34-2 disable erps
Description
This command is used to disable the global ERPS function on a switch.
Format
disable erps
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable ERPS:
DGS-3120-24TC:admin# disable erps
Command: disable erps
Success.
DGS-3120-24TC:admin#
34-3 create erps raps_vlan
Description
This command is used to create an R-APS VLAN on a switch. Only one R-APS VLAN should be
used to transfer R-APS messages.
Note that the R-APS VLAN must already have been created by the create vlan command.
Format
create erps raps_vlan <vlanid 1-4094>
Parameters
<vlanid 1-4094> - Specify the VLAN which will be the R-APS VLAN.
361