D-Link xStack Reference Manual page 776

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
80-2 show pim6
Description
This command is used to display the PIM6 configurations.
Format
show pim6 {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify to the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name.
Restrictions
None.
Example
To show brief information for the PIM6 protocol related parameters on all interfaces:
DGS-3120-24TC:admin#show pim6
Command: show pim6
PIM6 Global State
Last Hop SPT Switchover
Register Probe Interval
Register Suppression Timeout : 60 sec
Keepalive Period
Register Checksum Calculate
Embedded RP State
PIM6-SM Interface Table
DR
Interface Priority
------------ ----------
System 1
Total Entries : 1
DGS-3120-24TC:admin#
To show detailed information for PIM6 protocol related parameters on the interface "System":
: Disabled
: Never
: 5 sec
: 210 sec
: Not Include Data
: Disabled
Hello J/P
Interval Interval
-------- --------
60 60
771
BSR
State Border
-------- --------
Enabled Disabled