D-Link xStack Reference Manual page 314

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure DHCP relay option 82 policy:
DGS-3120-24TC:admin#config dhcp_relay option_82 policy replace
Command: config dhcp_relay option_82 policy replace
Success.
DGS-3120-24TC:admin#
25-22 config dhcp_relay option_82 remote_id
Description
This command is used to configure the remote ID string of the DHCP relay agent information
option 82 of the switch.
Format
config dhcp_relay option_82 remote_id [default | user_define <desc 32>]
Parameters
default - Use the Switch's system MAC address as remote ID.
user_define - Use the user-defined string as remote ID. The space character is allowed in the
string.
<desc 32> - Enter the user defined description here. This value can be up to 32 characters
long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the content in Remote ID sub-option:
DGS-3120-24TC:admin#config dhcp_relay option_82 remote_id user_define "D-Link
L2
Switch"
Command: config dhcp_relay option_82 remote_id user_define "D-Link L2 Switch"
Success.
DGS-3120-24TC:admin#
309