Enable Authorization Attributes - D-Link xStack Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
DGS-3120-24TC:admin#show authentication ports
Command: show authentication ports
Port Methods
---- -------------- ----------- ----------------------
1:1 None
1:2 None
1:3 None
1:4 None
1:5 None
1:6 None
1:7 None
1:8 None
1:9 None
1:10 None
1:11 None
1:12 None
1:13 None
1:14 None
1:15 None
1:16 None
1:17 None
1:18 None
1:19 None
1:20 None
CTRL+C ESC q Quit
16-8

enable authorization attributes

Description
This command is used to enable authorization.
Format
enable authorization attributes
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
This example sets authorization global state enabled:
Auth Mode Authentication VLAN(s)
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
Host-based
SPACE n Next Page ENTER
187
Next Entry a All