D-Link xStack Reference Manual page 343

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DHCPv6 relay option 37:
DGS-3120-24TC:admin#config dhcpv6_relay option_37 state enable
Command: config dhcpv6_relay option_37 state enable
Success.
DGS-3120-24TC:admin#config dhcpv6_relay option_37 check enable
Command: config dhcpv6_relay option_37 check enable
Success.
DGS-3120-24TC:admin#config dhcpv6_relay option_37 remote_id default
Command: config dhcpv6_relay option_37 remote_id default
Success.
DGS-3120-24TC:admin#
28-7 show dhcpv6_relay
Description
This command is used to display the current DHCPv6 relay configuration of the specified or all IP
Interfaces.
Format
show dhcpv6_relay {ipif <ipif_name 12>}
Parameters
ipif - (Optional) The IP information for DHCPv6 relay.
<ipif_name 12> - The name of the IP interface in which DHCPv6 relay is to be enabled.
Restrictions
None.
Example
To show the DHCPv6 relay configuration of all interfaces:
338