D-Link xStack Reference Manual page 258

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disabled the DHCPv6 client debug function:
DGS-3120-24TC:admin#debug dhcpv6_client state disable
Command: debug dhcpv6_client state disable
Success.
DGS-3120-24TC:admin#
22-13 debug dhcpv6_client output
Description
This command is used to set debug message to output to buffer or console.
Format
debug dhcpv6_client output [buffer | console]
Parameters
buffer - Let the debug message output to buffer.
console - Let the debug message output to console.
Restrictions
Only Administrator-level users can issue this command.
Example
To set debug information to output to console:
DGS-3120-24TC:admin#debug dhcpv6_client output console
Command: debug dhcpv6_client output console
Success.
DGS-3120-24TC:admin#
253