Connecting To A Conference; Direct Dial-In To The Mcu - Polycom RealPresence 800s Getting Started Manual

RealPresence Collaboration Server 800s/Virtual Edition Getting Started Guide

Connecting to a Conference

Direct Dial-in to the MCU

In the RealPresence CloudAxis Solution,Participants dial in to VMRs (Virtual Meeting Rooms)
defined on the RealPresence Virtualization Manager (DMA) component. This procedure describes
direct dial in to Meeting Rooms defined on the MCU component.
Direct dial-in connection to conferences and Meeting Rooms is available to all endpoints.
Participants must be provided with a dialing string which can vary according to the network type, conference
password and chairperson password.
Participants dial the conference dial-in string and are connected to the conference IVR Service. Once the
correct information, such as the conference password and chairperson password are entered, the
participants are connected to the conference.
Dial-in Connection via IVR System
In SVC Only Conferencing Mode, only SIP dial-in using the SVC protocol is available as follows:
● AVC-capable endpoints (participants) can only connect to an AVC Meeting Room. When dialing into
SVC Only Meeting Room the calls fail.
Polycom®, Inc. 153