Brocade Communications Systems Brocade 8/12c Command Reference Manual page 1096

22
zone
--rddelete name
EXAMPLES
1. Specific zone operation commands
The following example shows a scenario of an invalid configuration. If you attempt to create a zone z10
with an alias a10, then create a zone with name a10, z10 expects a10 to be an alias and results in an
invalid configuration.
To validate all zones in the currently enforced zone database:
The reason for not being in the current enforcement table could be one of the following:
•
•
•
To copy the cur_cfg1 zone configuration from the root zone database (AD0) to the current Admin
Domain:
To copy the backup_zn zone from the root zone database (AD0) to the current Admin Domain:
To copy the backup_zn zone from the root zone database (AD0) to the current Admin Domain, with
Admin Domain member list filtering:
1062
FCR | noFCR
Indicates whether or not this RD zone should function across a Fibre Channel
router (FCR). Specify FCR to support FCR. Specify noFCR if you do not wish to
support FCR.
Deletes the RD Zone specified by name. RD Zones are unique in that the zone
name is not user-defined. It is derived based on members and the specified
configuration. Use cdfgShow to display currently implemented RD zone by name.
switch:admin> zonecreate z10,a10
switch:admin> zonecreate a10, 1,2
switch:admin> zone --validate
Defined configuration:
zone: a10 1,2*
zone: z10 a10~
Effective configuration:
No Effective configuration: (No Access)
------------------------------------
~ - Invalid configuration
* - Member does not exist
# - Invalid usage of broadcast zone
The device is not online.
The device is online but is not Admin Domain-aware.
The device is online but it is not part of the current Admin Domain.
switch:admin> zone --copy AD0.cur_cfg1
switch:admin> zone --copy AD0.backup_zn
switch:admin> zone --copy -f AD0.backup_zn
Fabric OS Command Reference
53-1001764-01