Zoneobjectexpunge - Brocade Communications Systems Brocade 8/12c Command Reference Manual

zoneObjectExpunge

Expunges a zone object.
SYNOPSIS
zoneObjectExpunge "objectName"
DESCRIPTION
Use this command to expunge a zone object. In addition to deleting the object, this command also
removes the object from the member lists of all other objects. After successful execution of this
command, the specified object no longer exists the database. You can use this command for all zone
object types, including cfg, zone, and alias.
This command changes the defined configuration. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to
become effective, enable the configuration with the cfgEnable command.
NOTES
When FCS policy is enabled, this command can be issued only from the primary FCS switch.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
"objectName"
EXAMPLES
To create a configuration containing three zones:
Fabric OS Command Reference
53-1001764-01
The name of the object that you want to expunge. Quotation marks are optional.
This operand is required.
switch:admin> cfgshow
Defined configuration:
cfg: USA_cfg Red_zone; White_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Red_zone
1,0; loop1
zone: White_zone
1,3; 1,4
alias: array1 21:00:00:20:37:0c:76:8c; \
21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; \
21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; \
21:00:00:20:37:0c:71:df
switch:admin> zoneobjectexpunge "White_zone"
switch:admin> cfgshow
Defined configuration:
cfg: USA_cfg
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Red_zone
1,0; loop1
alias: array1 21:00:00:20:37:0c:76:8c; \
Red_zone; Blue_zone
zoneObjectExpunge
22
1073