Dell PowerConnect W-7200 Series Reference Manual page 1254

show rrm dot11k ap-channel-report
show rrm dot11k ap-channel-report [ap-name <name-of-an-ap> |
bssid <bssid-of-an-ap> | ip-addr <ip-address-of-an-ap>]
Description
Displays the channel information gathered by the AP. You can either specify an ap-name, bssid or ip-address of an
AP to see more details.
Syntax
Parameter
ap-name
bssid
ip-addr
Example
The output of this command shows the channel information for r-wing-94:94.
(host) # show rrm dot11k ap-channel-report ap-name r-wing-94
802.11K AP Channel Report Details
----------------------------------
Freq Band Channel List
--------- ------------
2.4 GHz 11,
5 GHz 36, 40, 157, 161, 165,
Num Entries:2
Command History
This command was available in ArubaOS 3.4
Command Information
Platforms
All platforms
1254 | show rrm dot11k ap-channel-report
Description
Enter the name of the AP.
Enter the BSSID address of the AP.
Enter the IP address of the AP.
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide