Chapter 77 Simple Mail Transfer Protocol (Smtp) Command List - D-Link DGS-3000 Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Chapter 77
enable smtp
disable smtp
config smtp {server <ipaddr> | server_port <tcp_port_number 1-65535> | self_mail_addr
<mail_addr 64> | [add mail_receiver <mail_addr 64> | delete mail_receiver <index 1-8>] |
server_ipv6 <ipv6addr> | server_port_ipv6 <tcp_port_number 1-65535>}(1)
show smtp
smtp send_testmsg
77-1 enable smtp
Description
This command is used to enable the SMTP status.
Format
enable smtp
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable SMTP status:
DGS-3000-26TC:admin#enable smtp
Command: enable smtp
Success.
DGS-3000-26TC:admin#
77-2 disable smtp
Description
This command is used to disable SMTP status.
Simple Mail Transfer
Protocol (SMTP) Command
List
742