Using Ec500 For The First Time; Enabling Ec500 Via Ec500 Access Number - Avaya

EC500 User Manual

Getting started
Your system administrator provides:
The EC500 access number you can dial to enable/disable EC500 or to
change your station security code.
The station security code you must use when enabling/disabling EC500 on
your cell phone (if you don't already have one). You can change this code
yourself as needed.
The feature access codes you must use to identify the function you wish to
perform (enable the administrable EC500 feature button on your office
telephone, enable EC500, disable EC500, or change your station security
code). Note that with this release of EC500, you can now enable and
disable EC500 from a feature button on your office telephone.
NOTE:
The last page of this guide contains two pocket reference cards on which
you can record this information. Cut out the pocket reference cards and
keep them with your cell phone for easy reference.

Using EC500 for the first time

Once you have the EC500 access number and feature access codes, you are
ready to enable EC500 to extend office calls to your cell phone.
Enabling EC500 via
EC500 access number
To enable EC500 for first-time use via the EC500 access number:
1. Dial the EC500 access number provided by your system administrator.
You hear a dial tone.
2. Enter the EC500 "enable" feature access code.
You hear a dial tone.
3. Enter your office phone's extension number.
4. Press the # button on your phone.
5. Enter your station security code.
6. Press the # button on your phone.
You hear a confirmation tone indicating EC500 is enabled.
7. Hang up to end the call.
NOTE:
If you do not receive a confirmation tone, hang up, verify the codes entered
and repeat the procedure from Step 1. If you still do not receive a
confirmation tone, contact your system administrator for assistance.
18
Issue 4 May 2003