Default Dialing - Avaya Communication Manager Administrator's Manual

Managing Data Calls
Intercom — Automatic and Dial
●
An extension with Data Privacy or Data Restriction active cannot originate an intercom call.
The user receives an intercept tone.
Music-on-Hold Access
●
If a user places a call with Data Privacy on hold, the user must withhold Music-on-Hold to
prevent the transmission of tones that a connected data service might falsely interpret as a
data transmission.
Priority Calls
●
If a user activates Data Privacy, Priority Calls are denied on analog telephones. However,
Priority Calls appear on the next available line appearance on multiappearance telephones.

Default Dialing

Default Dialing provides data-terminal users who dial a specific number the majority of the time
a very simple method of dialing that number. Normal data terminal dialing and alphanumeric
dialing are unaffected.
Default Dialing enhances data terminal (keyboard) dialing by allowing a data-terminal user to
place a data call to a preadministered destination by either pressing Enter at the DIAL: prompt
(for data terminals using DCP data modules) or typing d and pressing Enter at the CMD:
prompt (for data terminals using ISDN-BRI data modules). The data-terminal user with a DCP
data module can place calls to other destinations by entering the complete address after the
DIAL: prompt (normal data terminal dialing or alphanumeric dialing). The data-terminal user with
an ISDN-BRI data module can place calls to other destinations by typing d, a space, the
complete address. Press Enter after the CMD: prompt.
Note:
DU-type hunt groups connecting the system to a terminal server on a host
Note:
computer have hunt-group extensions set to no keyboard dialing.
For the AT command interface supported by the 7400A/7400B/8400B data module, to dial the
default destination, enter the ATD command (rather than press return).
528 Administrator Guide for Avaya Communication Manager